Potassium Sulfate Nanopowder (K2SO4, Purity: 99.9%)

High Purity Potassium Sulfate Nanopowder

Product Potassium Sulfate Nanopowder (K2SO4, Purity: 99.9%, APS: 80-100nm)

Quality Control: Each lot of Potassium Sulfate Nanopowder was tested successfully.

Size Analysis of Potassium Sulfate

Size Analysis of Potassium Sulfate Nanopowder

Materials Potassium Sulfate Nanopowder
Stock No NS6130-12-000267
CAS 7778-80-5 Confirm
APS 80-100 nm Confirm
Purity 99.9% Confirm
Molecular Formula K2SO4 Confirm
Molecular Weight 174.25g/mol Confirm
Appearance White Powder Confirm
Density 6.12 g/cm³ Confirm
Melting Point 1069 °C Confirm
Boiling Point 1689 °C Confirm
Crystallographic Structure Orthorhombic Confirm
Refractive Index 1.495 nD Confirm
Solubility Slightly soluble in glycerol, insoluble in acetone, alcohol, CS2 Confirm
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Moisture ≤ 0.2 %
Water Insoluble Matter 0.2 %
Chloride 100ppm
Mg 100ppm
Lead 50ppm
Iron 50ppm
Free Acid 100ppm

Experts Review:

58496396Dr. Bruce Perrault, Ph.D (Georgia Institute of Technology (Georgia Tech), USA)
Potassium Sulfate Nanopowder is a very important product. It’s used to supply potassium. Conventional agriculture, for the most part, supplies potassium with a muriate of potash or what’s called 0-0-60.
We don’t handle that because it has chlorides. It’s potassium chloride which is very detrimental to soil biology.


1252525Dr. Myron Rubenstein, Ph.D (Polytechnic University of Turin, Italy)
Potassium Sulfate Nanopowder
 is that it’s not an extremely high pH fertilizer product. Potassium chloride, on the other hand, is quite a bit higher in pH and has the tendency when used over time to push the pH high and that can be misleading for people that look at pH and then don’t put any calcium or limestone down. Potassium sulfate, because of the sulfate actually, will not push the soil pH. It’s more of a neutral pH, so it’s quite superior just from the aspect of the pH.


2536582Dr. Huojin Chan (University of Science and Technology of China, Hefei, Anhui, China)
Plants and Soils Need the Sulfur:-  Most intensely-farmed soils are sulfur deficient. In the past rainfall picked up sulfur out of the air and continuously supplied sulfur with every precipitation. Today with stringent environmental codes and cleaned up smoke stacks the free sulfur is a thing of the past. In order for plants to make oils and sulfur bearing amino acids such as cysteine and methionine the plants need an adequate supply of sulfur in the sulfate form. This is exactly what potassium sulfate supplies.


10604509_1459864657612760_2405225879143508610_oDr. Ms. Yi Yen Shi, (King Mongkut’s University of Technology Thonburi,Bangkok, Thailand)
The application of 100 lbs. of potassium sulfate will give a greater plant response than 200 lbs. of Potassium Sulfate Nanopowder. We have found that 100 lbs. of Potassium Sulfate Nanopowder is quite sufficient for most crops. The only exception to this is high-value, potassium-loving crops such as tomatoes, potatoes, pumpkins, and melons where 200-300 lbs. are used per acre.


125448Dr. Hans Roelofs Ph.D (National Technical University of Athens, Greece)
Potassium (K) fertilizer is commonly added to improve the yield and quality of plants growing in soils that are lacking an adequate supply of this essential nutrient. Potassium is needed to complete many essential functions in plants, such as activating enzyme reactions, synthesizing proteins, forming starch and sugars, and regulating water flow in cells and leaves. Often, concentrations of K in soil are too low to support healthy plant growth. Potassium sulfate is an excellent source of K nutrition for plants. The K portion of the K2SO4 is no different from other common potash fertilizers .


Nitrates Sulphide WEB

Potassium Sulfate Nanopowder

free quote

Contact Us for Potassium Sulfate Nanopowder
From us, you can easily purchase Potassium Sulfate Nanopowder at great prices. Place online order and we will dispatch your order through DHL, FedEx, UPS. You can also request for a quote by mailing us at sales@nanoshel.com Contact: +1 302 268 6163 (US and Europe), Contact: +91-9779550077 (India). We invite you to contact us for further information about our company and our capabilities. At Nanoshel, we could be glad to be of service to you. We look forward to your suggestions and feedback.


More Nitrates/Sulphides Products By Nanoshel

NS6130-12-000052 – IRON POWDER (Fe, Purity: 99.9%, APS: <50µm)

NS6130-12-000146 – VANADIUM (III) SULFATE (V2(SO4)3, Purity: 99.9%)

NS6130-12-000161 – CADMIUM SULFIDE POWDER (CdS, Purity: 99.9%)

NS6130-12-000165 – Tungsten Sulfide Powder (WS2, Purity: 99.9%,APS: 5-10µm)

NS6130-12-000249 – MANGANESE SULPHIDE NANOPOWDER (MnS, Purity: 99.9%)

NS6130-12-000250 – COBALT SULPHIDE NANOPOWDER (CoxSy, Purity: 99.9%)

NS6130-12-000251 – TIN (II) SULPHIDE NANOPOWDER (SnS, Purity: 99.9%)

NS6130-12-000258 – ZINC NITRATE HEXAHYDRATE (Zn (NO3)2 6H2O, Purity: 99.9%, APS: 80-100 nm)

NS6130-12-000267 – POTASSIUM SULFATE NANOPOWDER (K2SO4, Purity: 99.9%)

NS6130-12-000270 – MAGNESIUM NITRATE (Mg(NO3)2, Purity: 99.9%)

NS6130-12-000272 – TIN NITRATE (Sn (NO3)4, Purity: 99.9%)

NS6130-12-000295 – MOLYBDENUM DISULFIDE (MoS2, Purity: 99.9%)

NS6130-12-000336 – BARIUM SULPHATE NANOPOWDER (BaSO4, Purity: 99.9%)

NS6130-12-000409 – Iron Sulfide Powder (FeS, Purity: >99.99%, APS: 30-45 µm)