Home » Quick Drying Enamel (Purity: >95%, APS: 10 nm)

CNT/GRAPHENE DISPERSION

Stock No. CAS MSDS Specification COA
NS6130-04-448 N/A Specification pdf COA pdf

Quick Drying Enamel (Purity: >95%, APS: 10 nm)

Quick Drying Enamel

Quick Drying Enamel  (Purity: >95%, APS: 10 nm)

Quality Control: Each lot of Quick Drying Enamel  was tested successfully.

 
Product Quick Drying Enamel 
Stock No NS6130-04-448
Product Brand Supreme Confirm
APS 10 nm Confirm
Purity >95% Confirm
Color Black Confirm
Density 1.09 Kg/Litre Confirm
Viscosity 450 - 500 Cpu Confirm
Finish Full Gloss Confirm
Mwcnt Wt% 2.950 – 3.010 Wt% Confirm
Vehicle Type Styrenated Alkyd Confirm
Pigment Type Inorganic Oxides & Chromates Confirm
Solvent Type Aromatic Hydrocarbons Confirm
Flash Point Min 22°C Confirm
Drying Time: Surface 10 – 15 Minutes Confirm
Hard 1 – 2 Hours Confirm
Application Method Spray Or Dip Confirm
Application Viscosity Conventional Spray: 18 – 20” Fc4 Confirm
Recommended Thinner Q.D Enamel Thinners Confirm
Fineness of Grind 5 Microns Confirm
Gloss 85% On 60° Confirm
Heat Resistance 250 – 300 Degrees C Confirm
Coverage At Dft 40 µm 8 Square Metres Per Litre Confirm
Dry Film Thickness 40 Microns (Recommended)
Shelf Life 6 – 12 Months
Storage Store Away From Direct Heat
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Assay >95%

Expert Reviews

Dr. Alan Crawford Ph.D, (National Metallurgical Academy of Ukraine, Dnipropetrovsk, Ukraine)

Quick Drying Enamel: Graphene has emerged as a new class of promisingly attractive materials for applications such as optoelectronics, field-effect transistors, energy storage materials, transparent electrodes, biosensors, and composites due to its unique electrical, optical and mechanical properties. The combinations of one-dimensional (1D) carbon nanotubes (CNTs) and two dimensional (2D) graphene sheets dispersion have attracted great attention owing to their intriguing properties.


Dr. Alte Schule Rheingau Ph.D, (Limerick Institute of Technology, Limerick, Ireland)

Quick Drying Enamel: dispersion is a system in which particles are dispersed in a continuous phase of a different composition (or state). A dispersion is classified in a number of different ways, including how large the particles are in relation to the particles of the continuous phase, whether or not precipitation occurs, and the presence of Brownian motion. Carbon nanotubes (CNTs)/ Graphene dispersions effectively improve the electrical conductivity and mechanical properties; Effectively enhance tensile strength, hardness and elastic modulus characteristics.


Dr. Bunroeun Thong, Professor, (Phnom Penh Institute of Technology,Phnom Penh, Cambodia)

Quick Drying Enamel: It is still common belief that dispersions do not display any structure; i.e., the particles dispersed in the liquid or solid matrix are assumed to be statistically distributed. Therefore, for dispersions, usually percolation theory is assumed to appropriately describe their properties.


Dr. Ms. Karel Gorissen, (Costa Rica Institute of Technology, Alajuela, Limon)

Quick Drying Enamel: Potential applications of carbon nanotubes/Graphene dispersions are screen displays, electric motors, sensing devices, aerospace and automotive devices, body armor and tear-resistant cloth fibers and textiles products, sports equipments.


Dr. Ralph Bressler, (University of Southern Queensland, Australia)

Quick Drying Enamel: Dispersions serve as a conductive metallic or semiconductor, conductive films in coatings, plastics, certain bioscience applications, flat panel display, gas-discharge tubes in telecom networks, electromagnetic-wave absorption and shielding, energy conversion; lithium-battery anodes, hydrogen storage, nanotube composites, nanoprobes for STM, AFM, and EFM tips, nanolithography; nanoelectrodes, drug delivery, sensors, reinforcements in composites, supercapacitor.


Quick Drying Enamel

Quick Drying Enamel


Note
*Exchanges of materials/products are not permitted. Nanoshel does not offer refunds.
*US Dollar Cheques Not Accepted, Only Bank TT/Credit Cards Accepted