Tin Oxide Dispersion (SnO2, Purity: 99.9 %, APS: 20-80nm)

Tin Oxide Dispersion

Product: Tin Oxide Dispersion (SnO2, Purity: 99.9 %, APS: 20-80nm)

Quality Control: Each lot of NANOSHEL Tin Oxide Dispersion was tested successfully.

Tin Oxide Dispersion

SEM – Tin Oxide Nanoparticles

Materials Tin Oxide Dispersion
Stock No NS6130-04-436
CAS 18282-10-5 Confirm
APS 20-80nm Confirm
Purity 99.9 % Confirm
Appearance Liquid Brown Confirm
pH value 4-5 Confirm
Concentration 20 wt% (Available as per Customer requirement)
Dispersing Agent Organic Solvent (DMF), IPA Ethanol, Water (ddH2O)
Available Quantities 10ml, 50ml, 100ml, 250ml and larger quantities
Main Inspect Verifier Manager QC

Typical Chemical Analysis of Tin Oxide Dispersion

Fe 0.004 %
Al  0.002 %
Zn 0.001 %
Cu 0.002 %
Na 0.001 %
Si 0.01 %
Ni 0.0008 %
Ca 0.001 %

Experts Review:

Dr. Alan Crawford Ph.D (National Metallurgical Academy of Ukraine, Dnipropetrovsk, Ukraine)Dr. Alan Crawford Ph.D (National Metallurgical Academy of Ukraine, Dnipropetrovsk, Ukraine)
Tin Oxide Dispersion:
As our team procured the tin oxide dispersions from Nanoshel and are the obtained dispersions are well synthesized as per the requirement. Tin oxide dispersions is used widely to control air pollution and to detect toxic or smelling gases at low levels in the air and in the field of domestic and industrial applications. As the size of the particle decreases, the surface to volume ratio increases, this increases the number of oxygen sites on the surfaces in these reducing gas species and the sensitivity of nanocrystalline tin oxide.


Dr. Alte Schule Rheingau PhD. (Limerick Institute of Technology, Limerick, Ireland)Dr. Alte Schule Rheingau PhD. (Limerick Institute of Technology, Limerick, Ireland)
Tin Oxide Dispersion:
Nanoshel is trustworthy company to get the required nanomaterials. As we studied in literature the dispersion is a system in which the particles are dispersed in a continuous phase of different composition or state. The size of SnO2 dispersions particles varies within 1-80 nm of length and 10-100 nm of inner diameter, depending on the deposits. This material has an average diameter of 50 nm. These properties are truly fulfilled by Nanoshel.


Dr. Bunroeun Thong, Professor (Phnom Penh Institute of Technology,Phnom Penh, Cambodia)Dr. Bunroeun Thong, Professor (Phnom Penh Institute of Technology,Phnom Penh, Cambodia)
Tin Oxide Dispersion: Being a research scholar I used tin oxide dispersion from nanoshel in various sensing applications like in gas sensors, pressure sensors etc. The Products from Nanoshel are pure and cost effective.


Dr. Ms. Karel Gorissen (Costa Rica Institute of Technology, Alajuela, Limon)Dr. Ms. Karel Gorissen (Costa Rica Institute of Technology, Alajuela, Limon)
Tin Oxide Dispersion:
Thin films of tin oxide dispersion are also used in the dye sensitive solar cells. It is expected that highly crystalline particles, with an average diameter of less than 10 nm, will sinter at lower temperatures, and thus, allow broader application to complex geometries, heat-sensitive materials, and flexible substrates. Also used as catalysts, energy-saving coatings and anti-static coatings, in the making of optoelectronic devices and resistors. SnO2 layers have been used as transparent and electrically conducting coatings on glass. These films have a high mechanical and chemical stability.


Dr. Ralph Bressler(University of Southern Queensland, Australia)Dr. Ralph Bressler (University of Southern Queensland, Australia)
Tin Oxide Dispersion:
 Nanosized tin particles possess distinct properties compared with the bulk tin which have stimulated considerable interest in scientific research and technological applications. Typically, tin has a low melting point and a readiness to form alloys with other metal such as lead and bismuth. It is an important material in solder alloys. It is also used in transparent ant-static films, Anti-microbial, antibiotics and anti-fungal agents. Tin nanoparticles are mostly used in Coatings, plastics, nanofibres, bandages and textiles.


Tin Oxide Dispersion

Tin Oxide Dispersion

free quote

Contact Us for  SnO2 Nanoparticles Dispersion
From us, you can easily purchase Tin Oxide Dispersion at great prices. Place online order and we will dispatch your order through DHL, FedEx, UPS. You can also request for a quote by mailing us at sales@nanoshel.com Contact: +1 302 268 6163 (US and Europe), Contact: +91-9779550077 (India). We invite you to contact us for further information about our company and our capabilities. At Nanoshel, we could be glad to be of service to you. We look forward to your suggestions and feedback.


More Oxide Nano Dispersions By Nanoshel

NS6130-04-413 – Titania Nanoparticle Dispersion (TiO2, Anatase, 99.9%, 5-15nm)

NS6130-04-414 – ZnO Nanoparticle Dispersion (Zinc Oxide, 99.9 %, 30-40nm)

NS6130-04-415 – Nano Zinc Oxide Dispersion (ZnO, Purity: 99.9 %, APS: 50-80nm)

NS6130-04-420 – ATO Dispersion (ATO, SnO2:Sb2O3=90:10, 20 wt%, 20-80nm)

NS6130-04-421 – Zirconium Oxide Nanoparticle Dispersion (ZrO2, Purity: 99.9 %, APS: 45-55nm)

NS6130-04-422 – Iron Oxide Nanoparticles Dispersion (Fe2O3, Purity: 99.9 %, APS: 20-100nm)

NS6130-04-423 – ATO Nanoparticles Dispersion (SnO2:Sb2O3=90:10, 50-80nm)

NS6130-04-424 – Zinc Oxide Slurry (ZnO, Purity: 99.9 %, APS: 50-80nm)

NS6130-04-425 – Alumina Slurry Polishing (Al2O3, Purity: 99.9 %, APS: 50-80nm)

NS6130-04-426 – Zirconia Slurry Polishing (ZrO2, Purity: 99.9 %, APS: 50-80nm)