Titanium Pieces (Ti, Purity: 99.9%, Size : 3-5 mm)

Titanium Pieces

Product: Titanium Pieces (Ti, Purity: 99.9%, Size : 3-5 mm)

Quality Control: Each lot of NANOSHEL Titanium Pieces was tested successfully.

Titanium Pieces

Titanium Metal Pieces

 

Product Name Titanium Pieces
Stock No. NS6130-12-000177
CAS 7440-32-6 Confirm
Size 40-50 µm Confirm
Appearance Silvery Grey-White Metallic Confirm
Molecular Formula Ti Confirm
Density 4.506 g/cm3 Confirm
Melting Point 1668 °C Confirm
Boiling Point 3287 °C Confirm
Thermal Expansion 8.6 µm/(m·K) (at 25 °C) Confirm
Thermal Conductivity 21.9 W/(m·K) Confirm
Crystallographic Structure Hexagonal Close-Packed (hcp) Confirm
Available Quantities 25Gms, 50Gms, 100Gms and larger quantities
Main Inspect Verifier Manager QC (Titanium Pieces)

Typical Chemical Analysis of Titanium Pieces

Si ≤0.02 %
Fe ≤0.06 %
Cl ≤0.06 %
Mn ≤0.01 %
Mg ≤0.06 %
H ≤0.005 %
C ≤0.02 %

 Experts Review:

Miller-(Christopher)-345x239Dr. Baron Augustin, Ph.D (TUM)(Technical University of Munich, Germany)
Metal balls are rolling, spherical elements that exhibit greater strength and toughness than plastic and ceramic balls. They have a sufficient hardness for many industrial ball applications, and most products are electrically conductive. Some steel, nickel, and cobalt balls can be magnetized. Metal balls made from certain alloys can also provide corrosion resistance and refractory resistance.


images (33)

Dr. Darren Chandler, Ph.D(Manchester Metropolitan University, U.K)
Other applications for metal balls include proprietary, patented or specialty applications such as drilling equipment, hardness testers, swivel balls, pinball machine balls, weights, toys, bicycle parts, foosball balls, handles, knobs, skates, drawer slides, spacers, fillers, projectiles, marine parts, door locks, and coffee makers.


Wiggs

Dr. Ms. Cristiana Barzetti (University of Cagliari-Department of Chemical Engineering and Material Science, Italy)
Metal chips are generally irregular shaped portions of metal fragments where the key to selection is the “available surface area.” Chips come in a variety of sizes and shapes which can range from being quite large (an inch or two in diameter to fractions of inches). Generally, the smaller the chips, the more surface area there is of the material being used.


jetsonlee

Dr. Jang Huang, Ph.D (Shandong Science and Technology University, China)
Pellets have hollow bases (the skirt area of the pellet) that are generally larger in diameter than the front section (known as the head of the pellet). This enables the skirt to effectively seal the bore against the pressure pushing on the base of the pellet while the friction on the head area is not too high.


images (21)Dr. Mark Brown (Georgia Institute of Technology in Atlanta,USA)
Metal Balls for valve applications include products for check valves and ball valves, as well as trunnion, segment, stem, three-way, four-way, poly or multiple way, and two-piece balls. Valve balls must have a controlled sphericity and sufficient tolerances for proper sealing against the valve seat.


Titanium Pieces

Titanium Pieces



Nanoshel’s Product Categories Link:

ZnSe/ZnS QDs WATER SOLUBLE, InP ZnS QDs SURFACE MODIFIED, CdS/ZnS QDs H2O SOLUBLE, PbS QDs SURFACE MODIFIED, ARSENIDES, LANTHANIDE NANOMATERIALS, TRANSITION METAL NANOMATERIALS, SPECIALITY CHEMICALS, MAGNETIC NANOPARTICLES, CUSTOM SYENTHESIS, METALIC FOAMS, SCREEN PRINTED BIO SENSOR, LITHIUM ION BATTERY MATERIAL, ITO COATED GLASS, POLYMERS NANO MATERIAL, NANO FABRIC COATINGS, METAL FOILS, PELLETS CHIPS METAL BALLS, WAFERS & TARGETS, SPUTTERING TARGETS, SINGLE CRYSTAL SUBSTRATES, PYROLITIC GRAPHITE, PROTECTIVE EQUIPMENTS, METAL CRUCIBLES, ALUMINA CERAMIC TILES, INORGANIC COMPOUNDS