Triphenylamine Sputtering Target (C57H48N4, Diameter: 2″, Thickness: 3mm)

Sputtering Target

Product: Triphenylamine Sputtering Target (C57H48N4, Diameter: 2″, Thickness: 3mm)

Quality Control: Each lot of NANOSHEL Triphenylamine Sputtering Target was tested successfully.

Triphenylamine Sputtering Target Banner

Triphenylamine Sputtering Target

Product Name Triphenylamine Sputtering Target
Stock No. NS6130-10-1278 Confirm
CAS 124729-98-2 Confirm
Diameter 2 inch Confirm
Thickness 3mm Confirm
Purity >99 % Confirm
Molecular Formula C57H48N4 Confirm
Molecular Weight 789.02 g/mol Confirm
Melting Point 203-207 °C Confirm
Main Inspect Verifier Manager QC

Experts Review:

maslinDr. Jochen Maier, Ph.D (Canterbury Christ Church University, New Zealand)
Sputtering is a technology capable of depositing thin films from a wide variety of materials on to diverse substrate shapes and sizes. The process is repeatable and can be scaled up from small research and development projects, to production batches involving medium to large substrate areas. The gas use for sputtering is inert such as argon. For efficient momentum transfer projectile mass must match target mass, so for sputtering light elements neon is also used and for heavy elements krypton or xenon.


Website-profile-pics-033-3Dr. Ms. Suvi Ellilä, Ph.D (Halmstad University department of Research & technology, Sweden)
Reactive gases are used to sputter compounds. The chemical reaction can occur on the target surface, in-flight or on the substrate depending on the process parameters. The many parameters make sputter deposition a complex process but allow experts a large degree of control over the growth and microstructure of the film.


HermanCainProfilePicDr. Patrick Nilssen (Northern Private University Olivos, Peru)
Most sputtering target materials can be fabricated into a wide range of shapes and sizes. There are some technical limitations to the maximum size for a given single piece construction. In such cases, a multi-segmented target can be produced with the individual segments joined together by butt or beveled joints. Commonly used targets are circular or rectangular, although other shapes including square and triangular.


article-2738491-20EBB6E400000578-840_306x423Dr. Ms. Maryann Hine, Ph.D (Brewerville Institute of Technology,Liberia)
Nowadays applications of sputtering range from semiconductor industry for Thin Film deposition of various materials in integrated circuit processing, to architectural window glass for energy conservation, decorative with familiar gold-coloured hard coating created by Titanium Nitride and hardwearing coatings for tools and consumer goods, to deposition of metals during fabrication of CDs and DVDs.


CaptureDr. Peter Worcester (Murdoch University, Perth, Western Australia)
Sputter Deposition is a method of depositing thin films by sputtering that involves eroding materilas from a “ target” source onto a “substrate” e.g. silicon wafer. Sputtered atoms are ejected into the gas phase but are not in their thermodynamic equilibrium state, and tend to deposit on all surfaces in the vacuum chamber.


Triphenylamine Sputtering Target Banner

Triphenylamine Sputtering Target



Nanoshel’s Product Categories Link:

ORGANIC COMPOUNDS, METAL ORGANIC FRAMEWORKS, FEED GRADE ACTIVE PHARMACEUTICAL INGREDIENT, ORGANIC FLUORINE MATERIALS, NEW PRODUCTS, METAL MICRO POWDER, OXIDE MICRO POWDER, COMPOUND MICRO POWDER, ALLOY MICRO POWDER, CLAY POWDER, CARBON POWDER, 3D PRINTING POWDER, ULTRA HIGH TEMPERATURE CERAMICS NANOMATERIALS, ACETATES BORATES NANOMATERIALS, CARBIDES ALUMINATES NANOMATERIALS, CHLORIDES NANOMATERIALS, FLUORIDES NANOMATERIALS, NITRATES/SULPHIDES, SILICATES/TITANATES, STIMULATES/ALUMINATES NANOMATERIALS