Home » ATO Dispersion (ATO, SnO2:Sb2O3=20:80, 99.9%, APS: 20-80nm)

OXIDE DISPERSION

Stock No. CAS MSDS Specification COA
NS6130-04-435 128221-48-7 Specification pdf COA pdf

ATO Dispersion (ATO, SnO2:Sb2O3=20:80, 99.9%, APS: 20-80nm)

ATO Dispersion

ATO Dispersion (ATO, SnO2:Sb2O3=20:80, 99.9%, APS: 20-80nm)

Quality Control: Each lot of Antimony Tin Oxide Dispersion was tested successfully.

SEM-ATO Dispersion

SEM-ATO Dispersion

 
Product Antimony Tin Oxide Dispersion
Stock No NS6130-04-435
CAS 128221-48-7 Confirm
HS Code 32099010 Confirm
APS 20-80nm Confirm
Purity 99.9 % Confirm
Form Liquid Confirm
Color Milky White Confirm
PH value 4-5 Confirm
Major ingredient SnO2:Sb2O3=20:80 Confirm
Concentration 20 wt% (Available as per Customer requirement)
Dispersing Agent Organic Solvent (DMF), IPA Ethanol, Water (ddH2O)
Available Quantities 10ml, 50ml, 100ml, 250ml and larger quantities
Main Inspect Verifier Manager QC

Typical Chemical Analysis

Assay 99.9 %

Expert Reviews

Dr. Alan Crawford Ph.D, (National Metallurgical Academy of Ukraine, Dnipropetrovsk, Ukraine)

ATO Dispersion: A wide usage of metal oxide nanoparticles and nano structured materials attracts many people to research for their controlled synthesis via new method. Because, special properties of metallic or metal oxide nanoparticles exhibited several potential application in electronics, optoelectronics, catalysis and thin film coatings. In particular, alumina nanoparticles are expected to play important roles in a variety of relevant applications, and hence, the field has generated important contributions regarding the synthesis and processing of such particles.


Dr. Alte Schule Rheingau Ph.D, (Limerick Institute of Technology, Limerick, Ireland)

ATO Dispersion: Metal oxide in a dispersed form is used in a number of formulations which contain Water. Such formulations include sun screening preparations, cosmetics and veterinary products. The preparation of these formulations is greatly eased if the metal oxide is available in the form of an aqueous dispersion which can be readily incorporated into the formulation. However, stable dispersions of oxides are difficult to prepare and the Zinc oxide may dissolve at low or high pH values.


Dr. Bunroeun Thong, Professor, (Phnom Penh Institute of Technology, Phnom Penh, Cambodia)

ATO Dispersion: Oxide dispersion is non-toxic and chemical properties are stable. It almost has no reaction with other material produce under normal temperature. It is a partial acid oxide. It has no reaction with oxygen, hydrogen sulfide, sulfur dioxide, carbon dioxide and ammonia and is not soluble in water, fatty acids, other organic acid and weak inorganic acid except for alkali and hot nitric acid. But, in some specific conditions, titanium dioxide can get reaction with some substance.


Dr. Ms. Karel Gorissen, (Costa Rica Institute of Technology, Alajuela, Limon)

ATO Dispersion: Nanodispersion are composites consisting of solid nanoparticles with sizes varying generally from 1 to 100 nm dispersed in heat transfer liquids such as water, ethylene glycol, propylene glycol and so on. In the last decade, nanofluids have gained significant attention due to their enhanced thermal properties. A great deal of energy is expended heating industrial and residential buildings in the cold regions of the world.


Dr. Ralph Bressler, (University of Southern Queensland, Australia)

ATO Dispersion: A stable colloidal dispersion is expected to remain without sedimentation even after prolonged periods of storage. The settling behavior of dispersions depends mainly on the size and density of the dispersed particles. Dispersion of nanopowders into liquids is a challenging task. The high surface area and surface energy which are responsible for the beneficial effects of Nanomaterials cause agglomeration of particles which leads to poor quality dispersions.


ATO Dispersion

ATO Dispersion


Note
*Exchanges of materials/products are not permitted. Nanoshel does not offer refunds.
*US Dollar Cheques Not Accepted, Only Bank TT/Credit Cards Accepted