Titanium Nitride Powder (TiN, Purity: 99%, APS: 40-50μm)

Titanium Nitride Powder

Product: Titanium Nitride Powder (TiN, Purity: 99%, APS: 40-50μm)

Quality Control: Each lot of NANOSHEL Titanium Nitride Powder was tested successfully.

Titanium Nitride Powder

SEM – TiN Powder

Titanium Nitride Powder

Particles Size Analysis – TiN Powder

Material Titanium Nitride Powder
Stock No NS6130-05-592
CAS 25583-20-4 Confirm
APS 40-50μm Confirm
Purity 99% Confirm
Color Yellow-Brown Confirm
Density 5.22 g/cm³ Confirm
Molecular Weight 61.874 g/mol Confirm
Melting Point 2930 °C Confirm
Available Quantities 25Gms, 50Gms, 100Gms and larger quantities
Main Inspect Verifier Manager QC
Typical Chemical Analysis

Al 0.001 %
Fe 0.001 %
Ca 0.002 %
Mg 0.001 %
Cu 0.001 %
Mn 0.001 %
Na 0.001 %
Co 0.001 %
Ni 0.001 %
Si 0.001 %
Pb 0.001 %
k 0.005 %
F.N 0.020 %
C 0.001 %
S 0.001 %
T.O 0.020 %

Experts Review:

58496396Dr. Bruce Perrault, Ph.D (Georgia Institute of Technology (Georgia Tech), USA)
In recent years, much attention has been paid to the synthesis and study of Titanium Nitride Powder because of wide range of potential applications. Particularly, magnetic nanoparticles can have the special characteristic of exhibiting single-domain magnetism and can be used in magnetic tapes, ferrofluid, magnetic refrigerants, etc, because of their ultra fine size dimensioned with magnetic domain size. Oxide coated iron nanoparticles are non-toxic materials and due to enhanced magnetic properties can be more effective as compare with magnetite nanoparticles for biomedical application.


1252525Dr. Myron Rubenstein, Ph.D (Polytechnic University of Turin, Italy)
The particles that are used in the pharmaceutical industry are still micron size only because the Titanium Nitride Powder in the pharmaceutical industry are still in the research stage for most of the cases but in some cases of laparoscopy and angioscopy nano powders have been used but it are not cost effective. In the recent years the demand for nano powders are increased drastically because of its wide range of applications by producing Nano powder with metals like aluminum, iron and copper. This Novel technology is used in the production of aluminum powder which has applications in aviation industry.


2536582Dr. Huojin Chan (University of Science and Technology of China, Hefei, Anhui, China)
Production of Titanium Nitride Powder had been developed by gas phase synthesis through the pyrolysis of organometallic precursors. We adjust this method as the method for industrial synthesis of commercially available nanopowder of mean size of 6-100 nm. This method runs without vacuum and gives a relative high productivity of laboratory equipment.


10604509_1459864657612760_2405225879143508610_oDr. Ms. Yi Yen Shi, (King Mongkut’s University of Technology Thonburi,Bangkok, Thailand)
Titanium Nitride Powder have wide range of applications and different methods are available for production. In the paper the three methods discussed are mainly used in pharmaceutical industries and electronic industries for the production of nano powder. The powder produced in (PGSS) is in amorphous form where has in (DELOS) it is crystalline form. In the above methods (PGSS) process is more advantageous than any other process because it is flexible as we can control the size of the powder produced by controlling the amount of super critical fluid used in the process and we can maximize and minimize the yield of the production.


125448Dr. Hans Roelofs Ph.D (National Technical University of Athens, Greece)
Titanium Nitride Powder has many applications in different fields. Ceramics used in nano sized powders are more ductile at elevated temperatures compared to coarse grained ceramics and can be sintered at low temperatures. Nano sized powders of iron and copper have hardness about 4-6 times higher than the bulk materials because bulk materials have dislocations. Nano sized copper and silver are used in conducting ink and polymers. In Magnetic mono domains which increases the coercively compared to large particles these increases the storage capacities of the hard disks in the computers without increasing the physical dimensions. Nano powder has various applications in the pharmaceutical and medical field.


Titanium Nitride Nanopowder

Titanium Nitride Nanopowder



Nanoshel’s Product Categories Link:

METAL NANOPOWDERS,COMPOUND NANOPOWDERS,OXIDE NANOPOWDERS,ALLOY NANOPOWDERS,CLAY NANOPOWDERS,GRAPHENE NANOPOWDERS,METAL NANOWIRES & NANORODS,DOPED NANOPOWDERS,SINGLE WALL CNT,MULTI WALL CNT,DOUBLE WALL CNT,FUNCTIONALIZED SWCNT,FUNCTIONALIZED MWCNT,INDUSTRIAL MWCNT,CARBON NANOTUBE ARRAY,METAL NANO DISPERSIONS,OXIDE NANO DISPERSIONS,CNT GRAPHENE DISPERSION,BIO NANO CONJUGATE SERVISES,POSS,CORE SHELL NANOPARTICLES,ZnSE/ZnS QUANTUM DOTS,InP/ZnS QUANTUM DOTS,CdS/ZnS QUANTUM DOTS,CdSe/ZnS QUANTUM DOTS,UPCONVERTING NANOPARTICLES,PbS QUANTUM DOTS