Home » Alumina Tubes (Al2O3, Purity: 99.9%, Length: 300mm)

CERAMIC MATERIALS

Stock No. CAS MSDS Specification COA
NS6130-10-1351 1344-28-1 MSDS pdf Specification pdf

Alumina Tubes

(Al2O3, Purity: 99.9%, Length: 300mm)

Available Pack Size: 1Pc, 2Pcs, 5Pcs, 10Pcs & Bulk orders
 
Product Alumina Tubes
Stock No. NS6130-10-1351
CAS 1344-28-1 Confirm
Purity 99.9% Confirm
Length 300mm Confirm
Outer Diameter 6mm Confirm
Inner Diameter 3mm Confirm
Molecular Formula Al2O3 Confirm
Molecular Weight 101.96 g/mol Confirm
Density 3.5-4.1 g/cm³ Confirm
Melting Point 2040 °C Confirm
Thermal Expansion 6.8 to 8.2 µm/m-K Confirm
Thermal Conductivity 14 to 30 W/m-K Confirm
Quality Control Each lot of Alumina Tubes was tested successfully.
Main Inspect Verifier Manager QC

Expert Reviews

Terence Mitchell, PhD, (ICAI School of Engineering Madrid, Spain)

Alumina is a cost effective and widely used material in the family of engineered ceramics. Alumina ceramics have been developed and optimized for maximum wear resistance and corrosion resistance. A high density, diamond like hardness, fine grain structured and superior mechanical strength are the unique properties that make it the material of choice for a wide range of demanding applications.


Dr. Steven Atkinson, Professor, (University of Nottingham, UK)

Ceramic has uses similar to cast basalt but it has greater resistance to wear in high velocity applications and impact resistance in extreme dynamic systems. High alumina ceramic exhibits abrasion, corrosion, electrical, chemical, and erosion resistance. Alumina ceramics resist the effects of radiation that can destroy other materials.


Dr. Ms. Huian Ruan, (Taungoo Technological University, Myanmar)

Alumina ceramic can have very high dielectric strength, high resistivity and low dielectric loss thus it is also use in insulators and electronic components. High Alumina Ceramics is the most mature of the engineering ceramics, offering excellent electrical insulation properties together with high hardness and good wear resistance. It has a high melting point, high hardness and high mechanical strength.


Dr. Marco Ferro, MD PhD, (University of Nordland Bodø, Norway)

Alumina ceramics is one of the hardest material among all natural substances known. Under extreme abrasive conditions, no material can complete on a cost to life basis with it’s extreme hardness and wear resistance. In addition alumina, ceramics tiles has exceptional, thermal, electrical insulation, chemical, & mechanical properties and can be formed into any shape and size with various qualities for specific applications.


Alumina Tubes

Alumina Tubes


Note
*Exchanges of materials/products are not permitted. Nanoshel does not offer refunds.
*US Dollar Cheques Not Accepted, Only Bank TT/Credit Cards Accepted